Showing posts with label Can. Show all posts
Showing posts with label Can. Show all posts

Sunday, October 19, 2008

How the payload gets in the shuttle

Here's a bunch of pictures to show how our payload gets installed in the shuttle.


Our carriers that carry the payloads: MULE, FSS, ORUC and SLIC from left to right


Here's the pad. On the left is the RSS which is where the payload goes (light gray area).
Our stuff gets out to the pad via the ''can''.


Our payload is installed in the can then rotated to this standing position.
Here's the can leaving for the pad


Can enroute to Pad A


Later that day, the can arrives at the pad. Techs will lift it into the RSS and
prepare the payload for removal.


Here's a pic of the RSS with the can installed (white rectangle in middle of gray structure).


That's the can in the middle of the RSS. The RSS stays open until our
stuff is removed from the can.


One last picture of the RSS with the can.


There is a room in the RSS called the Payload Changeout Room (PCR). We spent A LOT of time there. Above is a picture of the can with its doors open.


A big machine called the PGHM (pronounced piggum) pulls the payload out of the can and then sticks it in the shuttle. The PGHM is the white thing on the right that rolls and grabs our stuff.



When the payload is inside the PCR, the can is lowered and the RSS rotates
onto the shuttle as seen above.


The shuttle's payload bay doors open and the payload is unbagged. The PGHM can now roll forward and install our carriers.



That's all there is to it! We spent a whole week in that PCR watching techs only to get our mission delayed and everything taken out! Yay!

Our carriers are back in the processing facility and this coming week we will do our last tests before returning to Maryland. Then, in a few months, we can come back and do it all again!

Wednesday, July 16, 2008

Lunch Trip 1

New feature for the blog: Lunch Trip

I'll go on a little trip to explore KSC or the air force base during lunch, or down time. My first one is kind of a drive-by look at the VAB (vehicle assembly building), launch Pad A and the Crawler.


Here's the VAB:

The VAB is the largest 1 story building in the world. It is 525 feet tall, 716 feet long and 518 feet wide. Each of the stars on the American Flag painted on the building is 6 feet across, the blue field is the size of a regulation basketball court and the whole flag is as long as a football field. It is able to withstand hurricanes, but Hurricane Frances blew off some panels (top picture, left of the flag). The rocks seen in the left pic are on the "Crawlerway", and they are special rocks that were selected due to their compression properties

The crawler is what gets to ride on the "Crawlerway". Here it is:
The Crawler weighs 6 million pounds (each tread weighs about 1 ton). The crawler's max speed is 1 mile per hour and burns 150 gallons per mile. The distance from the VAB to a pad is about 3.5 miles, which at today's gas prices is about $2100. Takes about 5 hours to go to the pad.



Next stop: Pad A. This pad is where the Atlantis will blast off from (so says the security guard). Couldn't get right up on it (even though i have authorization) because I didn't have a hard hat. Check it:




Finally, got to see the can. This thing will drive all the payloads to the pad. It will get lifted vertically in that big gray structure and all the payloads will get pushed into the Orbiter (space shuttle) cargo bay.




Check back tomorrow for the next Lunch Trip: Complex 34, Where Saturn 1 and 1B were launched from!